 The ED510 Display Module is designed to operate with the Flame-Monitor
Burner Management Control System using the EP and EPD style programmer
modules. The ED510 display is optional for EPD programmers, but is
required for the EP style programmers.
The ED510 display module provides the following features and capabilities:
-
LCD backlit display with two (2) lines of sixteen (16) characters each.
-
Continuous display of current burner operating status, including first out annunciation in the event of a lockout condition.
- Three (3) key, tactile dome keypad provides historical information
of the burner, last six (6) lockout conditions (with burner cycle and
burner hour time stamp), assign messages associated with the operation
of the E300 expansion module, and diagnostic messages.
-
Design which mounts directly onto the front face of the EP style programmers.
-
RJ style connector for connection to the EP and EPD style programmers.
1
-
Remote display capability with the EP and EPD style programmers using standard DIN sized opening and remote mounting kit.
1. The EP programmers must have an Eng. code of 28 or higher, the EPD programmers must have an Eng. code of 02 or higher. |
|
Last Updated ( Sunday, 16 October 2005 )
|
