 The Flame-Monitor Series
provides the proper burner sequencing, ignition and flame monitoring
protection on automatically ignited oil, gas and combination fuel
burners. On a safety shutdown, the display module will advise the
operator that the control is in "Lockout" and indicate the cause as
well as the position in the operating sequence that it occurred.
Interchangeable programmer and flame amplifier modules allow complete
versatility in selecting control function. The Flame-Monitor control
uses the same wiring base as the Fireye D-Series and C-Series Controls
and is directly interchangeable with most models without rewiring. The Flame-Monitor control can be used with ultraviolet, AUTOCHECK ®
infrared, photocell, flame rod or self-check ultraviolet flame scanners
by choosing the proper amplifier module. Special features include:
remote reset, remote display, expanded annunciation of safety lockouts,
programmability of safety interlock messages, and remote data
communications capability.
The complete FLAME-MONITOR control consists of:
-
E110 Chassis
-
ED510 Display Module
-
EP Programmer or EPD Programmer
-
(EPD Programmers do not require ED510 display)
-
Amplifier
-
Scanner
-
Wiring Base
|
|
Last Updated ( Thursday, 30 November 2006 )
|
